Pendleton Wood Blinds From Pendleton Window Treatments

Painted blinds look chalky against fresh millwork

You're matching window blinds to a stained stair rail

A study feels unfinished every time you walk in

One corner of the opening sits visibly lower than the other

Old slats have lightened on the sun side only

You want blinds that lift out of the way entirely

The dining room has had bare windows for years

A living room span is wider than a support bracket allows

A high window nobody can reach stays closed all year

New trim went in and the blinds no longer match

Room-by-room check that every opening stays conditioned all year before wood goes onto the order

Wet rooms ruled out in writing, because a bath or a window over a sink is a faux wood job

Three widths and three heights per opening, plus a diagonal check for square

Mounting depth measured so the headrail sits fully inside the opening where an inside mount is wanted

Basswood specified as the working standard, with heavier species used only where the grain has to carry a room

Slat size chosen against the opening height and the weight of the existing casing

Wider single spans priced without a support bracket, since wood weighs less per foot than composite does

Stain or paint matched from a physical sample held against your actual trim in your actual light

Grain variation and color drift across a stained order explained before anything gets signed

Cloth tape ladders selected where a woven band suits the room and hides the route holes

Routeless construction offered where a line of lit holes would bother you at night

Valance profile and return depth chosen to sit correctly against existing millwork

Wand tilt set as the default, with cord tilt only where a wand fouls a handle or a return

Cordless lift specified in bedrooms, stairwells and any room children use

Products specified to conform to ANSI/WCMA A100.1-2022 for cord access

Light gap per side disclosed at the measure and carried onto the paperwork

Written contract with scope, dates and total price, as IC 24-5-11 requires on residential work over $150

Slats leveled and both full tilt travel and full lift travel tested at every window on install day

2 inch basswood slat: Our working standard in real wood. Basswood is light for its stiffness, which is exactly what you want in a lift mechanism, and the 2 inch slat suits the openings and the casing we find in most central Indiana houses.

2 1/2 inch basswood slat: The same species with a wider face, so fewer slats cross the opening and the view out improves when they're tilted open. It suits taller windows and rooms with substantial casing, where a narrow slat starts to look busy against the trim.

Heavier hardwood species: Some lines offer denser woods that take a stain with more figure than basswood shows. They cost more and they weigh more, so we reserve them for a room where the blind is meant to be looked at rather than looked through.

Stained finish: A transparent finish that lets grain read through, which is the reason to buy wood at all. Expect variation from slat to slat, because that's the wood talking. We hold a physical sample against your trim before committing anything to an order.

Painted finish: An opaque finish in white or an off-white, which gives you wood's light weight and a face that reads as painted millwork. It's the right call when the blind should disappear into the trim instead of standing apart from it.

Custom color match: The factory matches a finish to a sample you supply, usually a piece of your casing or a stair part. It adds cost and time, sometimes a sample run before production, and it's the only honest way to hit an existing stain.

Cloth tape ladders: A woven tape running down the face of the blind that covers the route holes and adds a color band. On a stained wood blind it's a strong design move, and it narrows the view a little wherever a tape crosses the slats.

Routeless wood slats: The lift cord sits in a notch at the back edge instead of a punched hole, so a closed blind has no line of bright dots across it. In a bedroom with a streetlight outside, that's the difference people actually notice.

Crown or deco valance: A shaped valance with a deeper face than the standard flat one, meant to read as trim rather than as a cover for hardware. Choose it where the casing is heavy enough that a plain valance would look thin against it.

Cordless lift: A constant-force spring in the headrail with no lift cord on the blind at all. Wood's lower weight makes cordless feel better here than it does on composite, and it's what we put in bedrooms and anywhere along a stairwell.